Discounte Cheap Kitchen Backsplash Faux Decorative Antique Copper Plastic Wall Covering Ul Rated - 26ft. Roll x 2ft.Wc-70 Decorative!glue On,nail On,staple On,tape On!

Faux Decorative plastic quality antique copper back splash wall coverings are easily installed with adhesive glue/contact cement. Tin like appearance at a much more affordable price. These wall coverings will instantly & elegantly transform your kitchen or room! The rolls are 2 feet wide. One small roll will cover approximately 52 square feet. There will be a flat rate shipping fee of $19.00 for the 26 foot roll.x 2ft. Back splash Wall coverings are also available by square foot for a price of $2.69 per square foot. Restaurant renovation, Bathroom remodel, office renovation, wall cover.
INSTALLATION INSTRUCTIONS FOR PVC BACK SPLASH.We would recommend using DAP Contact Cement (original formula). That works great. But the new neoprene based formula does not work at all.

1.Measure the total length of the piece you wish to install. Cut the piece at the desired length, with regular scissors.

2.Fit the piece under the cupboards

3.Apply glue (contact cement) on the back of the back splash and on the wall (where you are going to attach it). We suggest Gel Contact Cement.

4.Let the glue dry till it become "tacky" and attach the piece to the wall, squeezing out all the air from behind the back splash.

You are done! Now you can cover the edges of a back splash with metal/wood/plastic edging and start enjoying your new back splash!
Price:$125.99

Click here to buy from Amazon

Antique Silver Decorative Plastic Ceiling Tiles Victorian Stile #302 24"x24" Ul Rated.can Be Glue On,nail On,tape On,staple on Any Flat Serfase.

Brush Nickel Beautiful & Decorative quality faux ceiling tile 24"x24" PVC and wall covering, ceiling covering, easily installed with adhesive glue/contact cement. Tin like appearance at a much more affordable price. These drop in ceiling tiles could be installed in the standard T-bar grids, and glue to a ceiling,wallcoverings will instantly & elegantly transform your kitchen or any room! glue with LOCTITE "power grab.

INSTALLATION INSTRUCTIONS FOR PVC Ceiling Tiles.
1.Prepare the surface: Wipe off the ceiling or surface and make it smooth and even. Remove loose plaster, paint, wall paper etc. Draw a chalk line in the middle of the room (preferably through light fixture electrical box)
2.Apply any good quality rubber base adhesive (we recommend Contact Cement) on the back of the tile, and let it be dry till the solvent of adhesive evaporates. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2-5 minutes.
3.Applying the adhesive on the ceiling also will improve bonding and strength. Approximately, 1 gallon of adhesive will be enough to cover 75 tiles or 300 square feet, if you apply on both, the tiles and the ceiling.
4.Place & Press: Place the sheet in the required position and press firmly but gently. Overlap the edges of the previous sheet and press firmly with fingertips. After completing first straight row work your way to the sides.
Price:

Click here to buy from Amazon